Adaptor Cables

12V Hardwire Power Adaptor

Includes power & ground hardwire clips.
PN: DMAC-Hardwire

Complete Product Details »

12V Power Adaptor

Extra/replacement Cigarette lighter power adaptor for all DM products PN: DMAC-12v

Complete Product Details »

6ft Thru Cab/Tank Adaptor Cable

Panel mount connector allows for thru cab or thru air tight tank mounting.
PN: DMAC-ACA6

Complete Product Details »

7in Monitor U-Bracket Stand

U-bracket monitor stand attaches to both sides of monitor with wing bolts. For use ONLY with monitor SN’s 6290 and up. PN: DMAC-7M-Bracket

Complete Product Details »

9in Monitor U-Bracket Stand

U-bracket monitor stand attaches to both sides of monitor with wing bolts. For use ONLY with monitor SN’s 3573 and up. PN: DMAC-9M-Bracket

Complete Product Details »

A/C Power Adaptor, North American(>1.5 amp):

Allows for A/C Power input to all Dakota Micro products.
PN: DMAC-PA

Complete Product Details »

AgCam Monitor to Audiovox Video Adaptor Cable

Allows for the input of an AgCam monitor into Audiovox Voyager and ToughCam cameras.
PN: DMAC-ADXC

Complete Product Details »

AgCam or EnduraCam 10ft Shielded Power Video Cable

10ft power video extension cables with watertight connectors
PN: DMAC-EC10

Complete Product Details »

AgCam or EnduraCam 16ft Multi-Camera Power Video Cable

Allows for 4 cameras to be run on a single cable.
PN: DMAC-JCT16

Complete Product Details »

AgCam or EnduraCam 1ft thru tank or cab Extension Cable

Panel mount connector allows for thru cab or thru air tight tank mounting.
PN: DMAC-ACA1

Complete Product Details »

AgCam or EnduraCam 20ft Braided Shielding Power Video Cable

20ft power video extension cable with additional internal steel braiding for extra abraision and pull resistance.
PN:  DMAC-EC20-6CF

Complete Product Details »

AgCam or EnduraCam 20ft Shielded Power Video Cable

20ft power video extension cables with watertight connectors.
PN: DMAC-EC20

 

Complete Product Details »

AgCam or EnduraCam 30ft Shielded Power Video Cable

30ft power video extension cables with watertight connectors.
PN: DMAC-EC30

Complete Product Details »

AgCam or EnduraCam 40ft Braided Shielding Power Video Cable

40ft power video exteniosn cable with additional internal steel braiding for extra abraision and pull resistance.
PN: DMAC-EC40-6CF

Complete Product Details »

AgCam or EnduraCam 40ft Shielded Power Video Cable

40ft power video extension cables with watertight connectors.
PN: DMAC-EC40

Complete Product Details »

AgCam or EnduraCam 50ft Shielded Power Video Cable

50ft power video extension cables with watertight connectors.
PN: DMAC-EC50

Complete Product Details »

AgCam or EnduraCam 60ft Shielded Power Video Cable

60ft power video extension cables with watertight connectors.
PN: DMAC-EC60

Complete Product Details »

AgCam or EnduraCam 6ft thru tank or cab Extension Cable

Panel mount connector allows for thru cab or thru air tight tank mounting.
PN: DMAC-ACA6

Complete Product Details »

AgCam or EnduraCam 80ft Shielded Power Video Cable

80ft power video extension cables with watertight connectors.
PN: DMAC-EC80

Complete Product Details »

AgCam or EnduraCam Adhesive Monitor Stand:

Extra/Replacement adhesive monitor base for all DM products.
PN: DMAC-B

Complete Product Details »

AgCam or EnduraCam Camera Magnet

Includes 65# magnet for camera bracket and mounting hardware.
PN: DMAC-CM

Complete Product Details »

AgCam or EnduraCam Camera Mounting Bracket w/ Magnet

Includes all required fasteners to attach magnet to bracket and bracket to camera and Allen wrench. PN: DMAC-CBM

Complete Product Details »

AgCam or EnduraCam Camera Tail - 90 degree

36" Camera tail, detachable, replacement/extra 90 degree (right angle)
PN: DMAC-CT-Angled

Complete Product Details »

AgCam or EnduraCam Female Dustcap

Dust cap for female connectors.
PN: DMAC-SWCAP

Complete Product Details »

AgCam or EnduraCam Monitor Remote

Indicate monitor serial number when ordering.
PN: DMAC-REMOTE-Serial Number

Complete Product Details »

AgCam or EnduraCam Monitor Wire Harness

DM Monitor main wire harness replacement cable includes inputs for: video (x4), power (12v or AC), event triggers (x4) & video output via RCA female.
PN: DMAC-MWH

Complete Product Details »

AgCam or EnduraCam Standard Camera Tail - Straight

36" Camera tail, detachable, replacement/extra straight.
PN: DMAC-CT

Complete Product Details »

Elite EnduraCam Function Plug Magnet

Includes ONE magnet only.
PN: DMAC-FCT-M

Complete Product Details »

EnduraCam Camera Coiled Trailer Video Connector Kit

Kit includes all of the necessary components. Total cable length 83ft - 10 meter and 15 meter power/video extensions & 12in coiled section that extends to 36in.
PN: DMAC-TCK

Complete Product Details »

EnduraCam Camera JD CommandView II Cab Video Adaptor Cable

Allows for the input of up to two EnduraCam cameras into JD CommandView II and 4600 Monitors.
PN: DMAC-JD2COC

Complete Product Details »

EnduraCam Camera to AgLeader Monitor Video Adaptor Cable

Allows for the input up to four (4) AgCam cameras into a AgLeader Integra or Versa monitor. Includes 12v power adaptor.
PN: DMAC-ALI

Complete Product Details »

EnduraCam Camera to Audiovox Video Adaptor Cable

Allows for the input of a single EnduraCam camera into Audiovox Voyager and ToughCam monitors.
PN: DMAC-ADVX-M

Complete Product Details »

EnduraCam Camera to BNC Female Video Adaptor Cable

Allows for the input of any camera with a BNC female connector to be input into an EnduraCam monitor.
PN: DMAC-SCA

Complete Product Details »

EnduraCam Camera to BNC Female with Separate Power Video Adaptor Cable

Allows for the input of a single EnduraCam camera into an existing 3rd party system via BNC port.
PN: DMAC-SSA

Complete Product Details »

EnduraCam Camera to C1000 Monitor Video Adaptor Cable

Allows for the input of a single EnduraCam camera into AGCO C1000 monitors.
PN: AC-A1C

Complete Product Details »

EnduraCam Camera to C2000 Monitor Video Adaptor Cable

Allows for the input of up to two (2) EnduraCam cameras into AGCO C2000 monitors.
PN: AC-A2C

Complete Product Details »

EnduraCam Camera to CAT/Orlaco Video Adaptor Cable

Allows for the input of a single EnduraCam camera into CAT pre-wired equipment as well as the Orlaco Monitor.
PN: DMAC-CAT1

Complete Product Details »

EnduraCam Camera to Cat5/RJ45 Video Adaptor Cable

Adapts an AgCam camera into Cat5/RJ45 as well as boosts video signal for extended video transmission up to 2,000 feet. Must be paired with DMAC-B024-M.
PN: DMAC-B024-F

Complete Product Details »

EnduraCam Camera to Claas Video Adaptor Cable

Allows for the input of a single EnduraCam camera into Claas pre-wired equipment.  Requires a PAL camera.
PN: DMAC-CLS

Complete Product Details »

EnduraCam Camera to CNH 7-pin Mini Amp Video Adaptor Cable

Allows for the input of up to three EnduraCam cameras into pre-wired CNH combines.
PN: DMAC-CNH1F

Complete Product Details »

EnduraCam Camera to CNH IntelliView or DVR One Camera Video Adaptor Cable

Allows for the input of a single EnduraCam camera into a CNH IntelliView Monitor or DVR. Includes 12v power adaptor.
PN: DMAC-CNH1

Complete Product Details »

EnduraCam Camera to CNH IntelliView Three Camera Video Adaptor Cable

Allows for the input of up to three (3) EnduraCam cameras into a CNH IntelliView or AFS Pro monitor.I ncludes 12v power adaptor.
PN: DMAC-CNH3

Complete Product Details »

EnduraCam Camera to Fendt VarioVerminal Adaptor Cable

Allows for input of a single EnduraCam camera into  VarioTerminal 10.4”. Tier 4i 800 & 900 Series
PN: AC-FDT01

Complete Product Details »

EnduraCam Camera to JD 2630 Three Camera Video Adaptor Cable

Allows for the input of up to three EnduraCam cameras into JD GS3 2630 Monitors.
PN: DMAC-JD3C

Complete Product Details »

EnduraCam Camera to JD 6R OR NH CR Combine Video Adaptor Cable

Allows for the input of a single EnduraCam camera into a JD 6R SEries OR NH CR Combine Monitor.
PN: DMAC-JD6R

Complete Product Details »

EnduraCam Camera to JD Command Center Video Adaptor Cable

Allows for input of a single EnduraCam camera into JD Command Center Console and 4600 Gen 4 Monitors.
PN: DMAC-JDCOC

Complete Product Details »

EnduraCam Camera to Kinze Grain Cart Video Adaptor Cable

Allows for the input of Deutsch camera connector on a Kinze Grain Cart to an EnduraCam 5 pin connector.
PN: DMAC-QC-2ACM

Complete Product Details »

EnduraCam Camera to OverView/CabCam Adaptor Cable

Allows for a single EnduraCam camera to be input into all OverView or CabCam Monitors
PN: DMAC-OVM

Complete Product Details »

EnduraCam Camera to RCA Male Adaptor Cable

Allows for an EnduraCam signal to be output via RCA from EnduraCam Quad or waterproof wireless receiver.
PN: DMAC-AV-F

Complete Product Details »

EnduraCam Camera to Threaded Collar S-Video male (Motec) Video Adaptor Cable

Allows for the input of a single EnduraCam camera into 3rd party monitor utilizing threaded collar s-video connector (such as Motec) PN: DMAC-MTM

Complete Product Details »

EnduraCam Camera to TOPCON X30 and C3000 Adaptor Cable

Allows for the input of up to two AgCam cameras into TOPCON X30 monitors or AGCO C3000 monitors.
PN: DMAC-USB1-TC

Complete Product Details »

EnduraCam Camera to Trimble Video Adaptor Cable

Allows for the input of a single EnduraCam camera into a Trimble TmX, FmX (up to 4 cameras) or 750 (up to 2 cameras) monitor. PN: DMAC-TRMBL-FMX

Complete Product Details »

EnduraCam Camera to TV Adaptor with AC Power Adaptor Cable

Allows for the input of a single EnduraCam camera into an RCA device, such as a TV. Separate power input required. Includes AC power adaptor.
PN: DMAC-TVA

Complete Product Details »

EnduraCam Camera to USB Adaptor Cable

Allows for the input of up to two EnduragCam cameras into USB port. Separate power input required100ft PN: DMAC-2USB.

Complete Product Details »

EnduraCam Camera to Versatile Monitor Adaptor Cable

Allows for the input of a single EnduraCam camera into Versatile Monitors.
PN: VER-WAC11

Complete Product Details »

EnduraCam Monitor to RCA Male Adaptor Cable

Allows for input of a DVD/DVR into EnduraCam monitor via RCA.
PN: DMAC-AV-M

Complete Product Details »

EnduraCam Monitor to Threaded Collar S-Video Female (Motec) Video Adaptor Cable

Allows for the input of a single 3rd party camera utilizing threaded collar s-video connector (such as Motec) to be input into an EnduraCam monitor. PN: DMAC-MTC

Complete Product Details »

Hard Mount Monitor Mount by Panavise

Permanently mount your DM monitor with this double articulated mount. Replaces included monitor bracket.
PN: DMAC-PV-PM

Complete Product Details »

Male BNC to Female RCA Adaptor

Adapts BNC into RCA for input into older style electronics.PN: DMAC-BNC-RCA

Complete Product Details »

Monitor In-line Noise Supressor

Ferrite ring suppresses noise from monitor and filters out unwanted external interference PN: DMAC-MRNG.

Complete Product Details »

OverView/CabCam Camera to EnduraCam Monitor Video Adaptor Cable

Allows for the input of OverView or CabCam Camera into the EnduraCam monitor.
PN: DMAC-OVC

Complete Product Details »

Suction Cup Mount Monitor Mount by Panavise

Securely mount your EnduraCam monitor to any glass surface. Replaces included monitor bracket.
PN: DMAC-PV-SM

Complete Product Details »