InnoPro Connect Dual Camera Kit (PN: DMIP-TCC2)

Unboxing

Quick Start

When To Use It

InnoPro Camera Specifications
Country of Manufacture	USA (with US and global components)
Product Version	1.0
Connectivity	Ethernet
Resolution (Main Stream)	Select-able Options: 1280720, 19201080*, 23041296, 2560*1440, 1-30FPS
Resolution (Sub Stream)	Select-able Options: 352288, 640360, 640480, 800448, 704*576, 1-30FPS
Video Coding Format	H264 and H265
Video Coding Compression	128Kbs-8192Kbps continuous adjustable
Video Subtitle Overlay	Name, Date, Time & Resolution
Megapixels	2MP (Low Light Optimized)
Protocol	ONVIF
Video Format	NTSC/PAL Switchable
Camera Body Lens	Auto Shading, Triple Hardened, Scratch Resistant Glass
Camera Body Construction	Anodized, Milled Aluminum Billet
Minimum Illumination (Color Day Mode)	.05 LUX (color day mode), .005 LUX (B&W night mode)
Infrared (IR) Illumination Type	Infrared LED w/ cut filter
Horizontal Field of View	82°
Operating Temperature Range	-22°F to 140°F [-30°C to 60°C]
Waterproof Rating	IP69K
Impact Rating	IK10
Dimensions L x W x H (inch)	2.13 x 2.13 x 2.12
Connector Types (Rear of Camera)	M12 12-Pin Female
Power Requirements	Regulated 12V DC ONLY
Warranty	5 Year + Lifetime for Moisture & Dust Ingress
Total Package Weight (lbs)	11.4

InnoPro Connect Tablet Specifications
Display Size	10.1"
Display Resolution	1920 x 1200
Display Brightness	1000-nit sunlight-readable display
Touchscreen	10-point capacitive hardened touchscreen
Processor	Octa-core processor
Memory	4 GB RAM
Storage	64 GB internal storage
Operating System	Android
Battery	3.8V, 10,000 mAh internal battery
Vehicle Power Behavior	Automatically powers on when external USB or DC power is applied and shuts down when external power is removed
Wi-Fi	Dual-band 2.4 GHz / 5 GHz
Bluetooth	Integrated Bluetooth
GPS	Integrated GPS
USB	USB Connectivity
Drop Resistance	1.2 m
Operating Temp	-4°F to 140°F (-20°C to 60°C)
Warranty	1 Year

InnoPro Connect Hub Specifications
Country of Manufacture	USA (with global components)
Product Version	1.0
Wi-Fi Band	2.4 GHz
Wi-Fi Standard	IEEE 802.11 b/g/n
Camera Capacity	Supports up to four Dakota Micro InnoPro IP cameras using 10/100 Ethernet-based connections
Wireless Rate	Up to 300 Mbps PHY
Antennas	Two external Wi-Fi antennas
Streaming Protocol	RTSP
Input Voltage	10–16.5 VDC
Recommended Power Supply	12V DC, 4A minimum
Typical Hub Power Consumption	Less than 1.5W
Typical System Consumption	Approximately 6.5W with four cameras
Maximum Observed Consumption	Less than 9W with four IR cameras
Dimensions	7.29" × 5.44" × 2.35"
Weight	1.99 lb.
Warranty	1 Year

InnoPro Connect Cable Specs
Country of Manufacture	USA (with global components)
Product Version	1.0
Length (feet)	25'
Cable Type	Cat5E
Connector Types	M12 12-Pin Male (to camera), Waterproof Ethernet (to hub)
Warranty	1 Year

FEATURES & BENEFITS InnoPro Cameras:

Ruggedized Camera Construction – Built with the same durability standards as EnduraCam® and AgCam®. Designed for harsh, mobile, and industrial environments.
IP69 Waterproof Protection – Fully sealed against dust and water. Handles high-pressure wash-downs and extreme outdoor exposure with confidence.
Armor-Grade Aluminum Housing – Precision-machined aluminum body resists impact, corrosion, and long-term environmental wear.
Watertight Rear M12 Connection – Features a durable M12 connector mounted directly on the rear of the camera. Creates a secure, sealed connection that protects against moisture and vibration.
High-Resolution 2560x1440 (2MP) Digital Imaging – Delivers sharp, detailed IP video that improves operator awareness and job site visibility.
Cat5e Ethernet Connectivity – Supports stable digital video transmission using standard Cat5e cabling for flexible system layouts.
Sealed Internal Electronics – Fully protected components prevent dust, moisture, and vibration from disrupting performance.
Built for Mobile Equipment – Performs reliably on agricultural machinery, construction equipment, and industrial vehicles where standard IP cameras fail.
Clean, Secure Installation – Rear-mounted connection reduces exposed wiring. As a result, installations remain stronger and more dependable.
Proven Dakota Micro Reliability – Designed to meet real-world demands and deliver consistent performance season after season.

InnoPro Connect Hub

Supports up to four InnoPro cameras — Expands the system as additional viewing areas are needed.
Creates a private wireless network — Connects the tablet and cameras without internet access or a subscription.
Supplies power and network connectivity to each camera — Reduces the number of separate connections required.
Four dedicated camera ports — Keeps each camera connection organized and easy to troubleshoot.
Watertight, locking Ethernet connections — Help protect against moisture, vibration, and accidental disconnection.
Two external Wi-Fi antennas — Support a more dependable wireless connection to the tablet.
Operates from 10–16.5 VDC — Works with common 12V mobile-equipment power systems.
Made in the USA with global components — Built and supported by Dakota Micro.
Compact enclosed design — Fits more easily into equipment and vehicle installations.
Local camera viewing — Keeps live video available even where cellular or Internet service is poor or unavailable.

InnoPro Connect Tablet

10.1" sunlight-readable touchscreen — Provides a clear view inside bright equipment cabs.
Rugged Android tablet — Built for use on mobile and industrial equipment.
Pre-installed InnoPro Connect app — Keeps camera setup and viewing simple.
Wireless hub connection — View camera feeds without running cables to the tablet.
Four-camera viewing screen — Monitor up to four connected cameras from one display.
Built-in battery — Allows portable viewing when the tablet is not connected to power.
USB-C and 2.1 mm power inputs — Provides flexible charging options at home or in equipment.
AC and 12V charging accessories included — Charge from a wall outlet or auxiliary power port.
Wi-Fi, Bluetooth, GPS, and cellular hardware — Supports additional tablet functions when needed.
Automatic power controls — Supports automatic startup and shutdown with compatible vehicle power connections.

InnoPro Connect Power/Video Cables

Carries power and video through one cable — Simplifies camera installation and cable routing.
Watertight locking connections — Help protect connections from moisture, vibration, and accidental disconnection.
Direct camera-to-hub connection — Provides dependable power and network connectivity.
25' cable included with each camera kit — Fits many common mobile-equipment installations.
Longer cable options available — Accommodate larger equipment and longer installation routes.
One cable per camera — Keeps system connections organized and easier to troubleshoot.
Cannot be joined together — Select the required cable length for each camera installation.