Configure a new Dakota Micro camera system, including your viewing screen, camera views, and cabling.
Build a new Dakota Micro camera system with the right views, screen, and cables.
No email required to see recommendations.
More than four views: Tell us how many views you need and whether they must be displayed simultaneously. Some systems require multiple monitors, Hubs or other equipment; do not assume a single kit covers every camera.
YOUR NEXT STEP
Select Yes below if you would like an exact recommendation.
IP CAMERA STARTING POINT
Camera and cable only; verify PC/NVR, power and network compatibility.
OUR PICK
One wired camera, Hub and rugged tablet.
Confirm the number of cameras, network power and PC/NVR compatibility before ordering.
Two camera views on a rugged tablet.
INNOPRO CONNECT · TWO-CAMERA BASE
ADDITIONAL CAMERA · ORDER 1
Order 1 additional InnoPro Connect camera kit. The Hub supports up to four camera ports.
ADDITIONAL CAMERA · ORDER 2
Order 2 additional InnoPro Connect camera kits. The Hub supports up to four camera ports.
Traditional monitor system for rugged equipment.
ALTERNATIVE · LIGHT DUTY
OverView is for lighter-duty applications; it does not replace AgCam durability.
Extreme-duty camera and monitor.
ALTERNATIVE · LESS EXTREME USE
AgCam is for less severe exposure; EnduraCam remains the better extreme-duty choice.
Economical system for light-duty viewing.
Compact, wide-angle view.
OverView for economy; RazerCam for compact wide-angle mounting.
Wireless link to the monitor; camera still needs power.
Confirm the correct transmitter/receiver, power and range.
We can help decide whether a cable or wireless viewing link makes sense.
Two camera views on a conventional monitor.
Two extreme-duty cameras and monitor.
Two light-duty camera views.
2 cameras require a multi-input monitor and verified kit.
Wireless viewing on a light-duty system.
OUR PICK · THREE-CAMERA KIT
Includes three AgCam cameras and a compatible monitor. Check supplied cable lengths before ordering extras.
ENDURACAM · 3 CAMERAS
Order quantity 3 of this camera. A compatible monitor is shown separately. Verify each cable run.
AGCAM · LESS EXTREME ALTERNATIVE
AgCam is not equivalent to EnduraCam for extreme exposure.
3 camera views; confirm the right monitor and kit.
3 cameras require a multi-input monitor and verified kit.
A quad monitor with three cameras needs the right cabling and kit.
Confirm the configuration before ordering.
For 3 views, confirm channel capacity and camera power.
Four camera views on a quad monitor.
ENDURACAM · 4 CAMERAS
Order quantity 4 of this camera. A compatible monitor is shown separately. Verify each cable run.
4 camera views; confirm the right monitor and kit.
4 cameras require a multi-input monitor and verified kit.
For 4 views, confirm channel capacity and camera power.
CAMERA 1
CAMERA 1 · EXTREME DUTY
CAMERA 1 · SKID STEER BACKUP
CAMERA 2
CAMERA 2 · EXTREME DUTY
CAMERA 2 · SKID STEER BACKUP
CAMERA 3
CAMERA 3 · EXTREME DUTY
CAMERA 3 · SKID STEER BACKUP
CAMERA 4
CAMERA 4 · EXTREME DUTY
CAMERA 4 · SKID STEER BACKUP
RECOMMENDED MONITOR · FOUR INPUTS
CAMERA · ONE PER VIEW
Order one camera for each planned view; the product card shows one camera.
RECOMMENDED MONITOR
OUR PICK · SKID STEER BACKUP
CAMERA · SKID STEER BACKUP
Order one RazerCam for each backing-up view. Confirm mounts and brackets.
LENS SELECTION
EXTENSION CABLE · 10 FT
One cable for each selected camera run. Select one cable per camera using this length; the quantity is updated when the form supports it. Check kit contents before ordering extras.
EXTENSION CABLE · 15 FT
EXTENSION CABLE · 20 FT
EXTENSION CABLE · 30 FT
EXTENSION CABLE · 40 FT
EXTENSION CABLE · 50 FT
EXTENSION CABLE · 60 FT
EXTENSION CABLE · 80 FT
EXTENSION CABLE · 25 FT
ALTERNATIVE · RUGGED TABLET
InnoPro cameras connect by cable to the Hub; the Hub communicates wirelessly with the tablet.
CAMERA · FOCUSED VIEW
For multiple identical views, order one camera per view.
RazerCam requires a compatible analog monitor; it will not connect directly to an InnoPro IP Hub or IP-only recorder. This kit uses a conventional monitor.
This kit is wired. If you need a wireless link, Dakota Micro should check the separate transmitter/receiver and monitor setup before ordering.
We’ll receive your answers along with your request.
