How do I connect my OverView Digital Wireless cameras to the monitor?

Here are some tips for pairing (connecting) your OverView Digital Wireless camera system. Note, you’ll want to test these before installing on the equipment.

1. Plug monitor into chosen power source. With no cameras connected, monitor will display “No Signal” message.
2. Have monitor show one camera image at a time (CAM 1/CAM2). IMPORTANT: Camera will not pair in split screen or SCAN mode
3. Plug 1 camera into chosen power source.
4. Press “MENU” button to enable menu selection. IMPORTANT: Menu NOT accessible in split screen mode.
5. Use Left/Right arrows to select the “Pair” icon.
6. Press “OK” button to select.
7. Once selected, your monitor will display the message “PAIRING START 50,” which means your monitor will scan for available camera signals.
8. Once the first camera has paired, switch the screen to show the other camera image ((CAM1/CAM2) NOTE: the screen will be black as we need to pair the second camera) and plug second camera into chosen power source.
9. Press “MENU” button to enable menu selection. IMPORTANT: Menu NOT accessible in split screen mode.
10. Use Left/Right arrows to select the “Pair” icon.
11. Press “OK” button to select.

DISCLAIMERS:

1. If camera signal cannot be found, unplug camera for 10 seconds and try again.
2. If unable to get the cameras to pair, ensure everything is getting adequate power. Cup your hands around the camera and see if the LED lights turn on to test.